Description
Jhemcu GHF411 AIO Brushless Flight Controller (BMI or ICM / 25x25mm / 40A / 2-6S)
Introducing the all-new GHF411-BMI all-in-one flight controller from Jhemcu. It features up to 40A, and 2 Uarts, with a 5V and a 10V BEC, all in a compact whoop-sized 25x25mm board.
SPECIFICATIONS:
- Model: GHF411AIO (BMI or ICM)
- MCU: STM32F411CEU/100MHz
- IMU: BMI270 or ICM42688P / Gyro / Accel
- OSD: AT7456E
- Blackbox: 8MB
- Input Voltage: 2-6S LiPo (7.4-26V)
- 5V – BEC: 5V/2.5A ±0.1V
- 10V – BEC: 10V/2A ±0.1V
- Receiver: SBUS / IBUS / DSM2 / DSMX / TBS / ELRS
- HD VTX: Yes
- Uart: 2
- IIC: IIC1
- LED Strip: Yes
- Buzzer: Yes
- ESC Signal: PWM, Oneshot42, Oneshot125, Multishot, DShot150, DShot300, DShot600
- USB: Micro USB
- Current Port: Yes
- Voltage Sensor: Yes
- DFU Button: Yes
- Firmware: Betaflight = 4.3.0 JHEF411.HEX (G_H_30_REV16_7.HEX)(See Below)
- ESC Current: 40A x 4
- MCU: EFM8BB21F16G
- Type: BLHeli_S
- Current Sensor: Yes
- Mounting: 25x25mm
- Weight: 7.6g
HELPFUL LINKS:
- GHF411-BMI Wiring Diagram
INCLUDES:
(1) Jhemcu GHF411 AIO Brushless Flight Controller (BMI or ICM)
(4) M2 x 6.5mm Grommets (Red)
(1) TVS Board
(1) Type-C Conversion Adapter
(2) Power Leads (Red & Black / 16AWG)
(1) XT60 Male Connector with Wire Sheathing
(4) 3-Pin / 1.25mm Connectors
(1) Wire Set
(1) 1000uf / 35A Capacitor
(4) 28AWG Silicone Wires
NOTE:
If you want to flash the latest Betaflight firmware on the ICM board, then you must select the correct gyro before pressing the “Flash Firmware” button. In order to do this, first enable the “Show Release Candidate” and “Enable Expert Mode” options. Second, select the correct target and the desired version. Then, input the following information into the “Custom Define” box:
GYRO_SPI_ICM42688P ACC_SPI_ICM42688P
